3kw Indoor Low Noise Dust Collector

China 3kw Indoor Low Noise Dust Collector manufacturer, Jar Hing, has adopted advanced configuration for our equipment, with imported 3 kw low noise dust collector fan, adding large filter element 300X500 mm. The overall size of the machine is 910X820X1940mm, which can purify 2400 cubic meters of air volume per hour, the wind pressure reaches 2800Pa, and the dust removal efficiency reaches 98%.

Core Advantages

1. Low noise design:
This low-noise dust collector uses self-developed noise reduction technology and optimized fan system. The noise of equipment operation is controlled below 65 decibels, which is equivalent to the sound of normal conversation. Employees no longer need to speak loudly.
2. Efficient dust collection:
The machine is equipped with a multi-layer filtration system, the filtration efficiency of particles above 0.3 microns is as high as 99.7%, which effectively ensures the cleanliness of the workshop air and meets the environmental protection requirements.
3. Energy saving and durability:
The 3kW high-efficiency motor with intelligent frequency conversion control reduces energy consumption by 20% compared with ordinary dust collectors, and the core components adopt anti-wear design, so even if it runs continuously for 8000 hours, there will be no failure.

FAQ

Q: Does the filter support washing?
A: The primary filter can be washed and reused, but the HEPA filter is disposable and has a life of about 6 to 12 months.

Q: Is it possible to customize the vacuum duct?
A: We support customization of non-standard interfaces. You only need to provide drawings or size.

Q: Is the noise data measured?
A: Of course, we will attach a noise test report issued by a third party. You are welcome to ask for a sample.

Q: Can I connect multiple devices?
A: Yes, Jar Hing's dust collector adopts a one-to-many design, and can be connected to up to 4 sandblasting machines at the same time.