1600mm Roller Sand Shower Machine

The 1600mm Roller Sand Shower Machine is the "fully automatic beautician" of the workpiece, designed by the professional manufacturer Jar Hing and offered at a competitive price. Its 1600mm large roller capacity can not only load a large number of small and medium-sized workpieces at one time, but also automatically remove the surface oxide layer, burrs, oil stains and residual sand through high-speed jet abrading. It can also create a uniform matte texture. Whether it is casting parts, stamping parts or hardware accessories, it can directly reach the finishing standard after being processed by this machine.

What Are the Advantages of a Roller Sand Shower Machine?

1. Very efficient:
This machine has a large drum of 1600mm, which can load 500kg workpieces at a time, and the processing capacity reaches 2000-3000kg per hour. It is twice as efficient as ordinary small drum sandblasting machines, and mass production does not delay anything.
2. The treatment is very uniform:
Uniform rotation of the drum and multi-angle sandblasting nozzle design, so that the workpiece will roll in all directions in the barrel, to ensure that each surface can be evenly covered by abrasive, there will be no local treatment to the situation.
3. Automation:
Automatic feeding and discharging, automatic sandblasting and automatic abrasive separation can be easily operated by only one worker, which will save more than half of the manpower compared with traditional manual polishing, and this can also avoid errors caused by manual operation.
4. Environmentally friendly and durable:
Because it carries an efficient dust removal system, the dust purification rate of the 1600mm Roller Sand Shower Machine is as high as 99%, which can ensure no dust in the workshop, and the body is welded with thick steel plates. The core components are also supplied by imported brands. As long as it is used normally, it does not need to be overhauled within 5 years.
5. Adaptability:
This sand shower machine can adjust the abrasive type and blasting pressure according to the workpiece material (steel, aluminum, alloy, etc.), so it can handle everything from fine deburring to strong rust removal, easily adapting to a variety of workpiece requirements.

FAQ

Q: Can these abrasives be reused?
A: Yes, the equipment comes with abrasive separation and recovery system, and the abrasive recovery rate is more than 95%, which can greatly reduce the cost of consumables.

Q: Can you handle irregular shaped workpieces?
A: It's perfectly OK. The workpiece will roll continuously when the drum rotates, so it can be handled evenly whether it is a special part or a small one.