1600mm Roller Type Sand Shower Machine

Designed and manufactured by China supplier Jar Hing, the 1600mm Roller Type Sand Shower Machine efficiently and evenly distributes sand onto a variety of surfaces. It is a must-have tool for construction and landscaping projects. With a width of 1600mm, it can cover large areas in a short time, with high productivity and low cost.

Equipment Advantages

1600mm Roller Type Sand Shower Machine speed is 1.77-8.85r/min, using stepless speed regulator, its sandblasting power is 0.75KW, and vibration power is 0.1kw, can sand casting space size is 1050X1000mm, machine barrel size is 1600X1200mm, using the form of sand behind, using processing guide belt, with smooth operation, low noise, less faults and other advantages, not only uniform sandblasting, sandblasting amount is also convenient to adjust, Sandblasting area is very large, suitable for large castings.

Applicable Industries

1. Automotive parts: engine block, gearbox housing, brake disc surface cleaning.
2. Hardware tools: wrench, screwdriver, pliers and other stamping parts to burr.
3. Engineering machinery: hydraulic parts, gears, bearings rust removal and surface strengthening.
4. Medical devices: precision grinding of Class I medical device accessories.
5. Aerospace: surface treatment of small aerospace components.

After-Sales Service and Support

1. Installation instructions:
Jar Hing will provide detailed installation videos and graphic instructions, and send technicians to install and debug the equipment until it runs normally.
2. Operational training:
We will give your workers free operation training, teach them how to use, how to maintain, to avoid improper operation caused by failure.
3. Maintenance Response:
If there is a problem with the equipment, you only need to call our after-sales telephone, and a technician will answer you within 2 hours, and on-site maintenance will be carried out within 48 hours (only for domestic customers in China).

FAQ

Q: How large is the 1600mm Roller Type Sand Shower Machine suitable for handling workpieces?
A: It is suitable for small and medium-sized workpieces with a diameter of no more than 300mm and a weight of no more than 5kg, such as brake discs, gears, hardware accessories, etc.

Q: How often does the abrasive change?
A: The abrasive of the machine can be recycled, usually 2-3 months to add a new abrasive, but the specific situation needs to see the frequency of use and workpiece material.

Q: Can I customize rollers of other size?
A: Yes, we support customization, from 800mm to 2000mm drum diameter can be produced.